Access Control Peripherals

WOR: Wiegand Output Receiver

Brand: 
Linear

The Model WOR Wiegand Output Receiver is designed for use as an access control interface for Linear’s block coded digital transmitters. The unit receives signals from transmitters, adds a facility code to the data, and sends the information to the Wiegand input of the access control panel via a 5-wire connection.

RGR: Remote Genie Receiver

Brand: 
Linear

The Model RGR Remote Genie Receiver is designed for use with Linear’s AE1000Plus, AE2000Plus, and AM3Plus access control systems. The RGR functions as a remote device that supports reception of Linear’s GT-30 and GT-31 transmitters.

Three antenna types can be used with this receiver. The enclosure mounted type ”F” connector is for connection to the antenna. The local whip antenna (supplied) screws directly on to the receiver’s connector. The directional (EXA-2000) and omni-directional (EXA-1000) remote antennas wire to the receiver’s antenna connector with type RG-59 cable.

AM-CRI: Card Reader Interface

Brand: 
Linear

The AM-CRI card reader interface is designed for use with Linear's access control systems. The interface will support one or two 26-bit or 31-bit Wiegand input devices.

If the readers used have a hold or buffer connection, two readers may be used to the AM-CRI. If the readers do not have a hold or buffer connection, one reader may be used with the AM-CRI.

Usually mounted near the readers, the AM-CRI interface connects to the control unit through a PBUS cable. Each reader connects to the AM-CRI through a six-wire (one LED in reader) or seven wire (two LEDs in reader) cable.

AM-RRR: Remote Radio Receiver

Brand: 
Linear

The Model AM-RRR Remote Radio Receiver is designed for use with Linear’s access control systems. The AM-RRR functions as a remote device that extends the radio range or supplies localized radio reception.

Three antenna types can be used with this receiver. The cabinet mounted type F connector is for connection to the antenna. The local whip antenna (supplied) screws directly on to the receiver’s connector. The directional (EXA-2000) and omni-directional (EXA-1000) remote antennas wire to the receiver’s antenna connector with type RG-59 cable.

AM-RPR: Remote Proximity Receiver

Brand: 
Linear

The Model AM-RPR Remote Proximity Receiver is designed for use with Linear's access control systems. The AM-RPR functions as a remote device that supplies localized radio reception.

AM-PR: Proximity Reader

Brand: 
Linear

The Model AM-PR Proximity Reader is designed for use with Linear's access control systems. This close-range, reader works with either proximity tags or proximity cards. The AM-PR is rugged, rated for extreme weather, and vandal resistant.

AM-KP: Exterior Keypad

Brand: 
Linear

The Model AM-KP keypad is designed for use with Linear's access control systems. The keypad is housed in a rugged cast aluminum enclosure. The die-cast keys have bright, easy-to-read yellow graphics. Each key has a positive tactile click feel when pressed. An internal sounder signals when a key is pressed.

The keypad can be mounted to a pedestal or directly to a wall. A keylock secures the keypad to the mounting backplate.

An incandescent panel lamp lights the keypad for nighttime use. Red, green and yellow indicators show power, access and lockout conditions.

AM-KPI: Interior Keypad

Brand: 
Linear

The Model AM-KPI Interior Keypad is designed for use with Linear's access control systems. The keypad is housed in a rugged, plastic enclosure and is designed to be mounted indoors in a standard single-gang electrical box. Tamper resistant screws secure the keypad to its mounting plate. The die-cast keys have bright, easy-to-read yellow graphics.

The keypad is supplied with a satin-chrome plastic bezel installed. Three interchangeable colored plastic bezels (white, ivory, & bronze) are included with the unit to customize the keypad appearance for the installation.

Syndicate content